Disney Skyliner Returns to Service

IMG_3558

Disney Skyliner is transporting guests around Walt Disney World Resort again this morning, eight days after a malfunction caused a few cabins to stack up in the Riviera angle station.  The system has been operating since then but without passengers.  Hours today are 8:00 am to 10:30 pm for all three gondola lines.  New signage reminds riders that Skyliner flights may occasionally be interrupted with stops and delays.  “Following a complete review with the manufacturer, we’ve made adjustments to our processes and training, and we are improving how we communicate with guests during their flight with Disney Skyliner,” a statement from Disney read.  “We again offer our deepest apologies to the guests impacted by the malfunction that resulted in extended operating delays on October 5th.”

According to the Skyliner website, temporary closures will follow this week for “system updates.”  On Wednesday, the Hollywood Studios line will be closed all day while the Epcot and Pop Century/Art of Animation lines will spin from 1:00 pm to 10:30 pm.  Thursday and Friday, all lines will be closed in the morning and open at 1:00 pm.

Skyliner launched on September 29th, linking Hollywood Studios to Epcot and four Walt Disney World resorts.  Doppelmayr designed and built the lifts and maintains them through its Doppelmayr Cable Car subsidiary in partnership with Disney.  “We greatly appreciate your ongoing patience and understanding, and we look forward to welcoming you back aboard Disney Skyliner,” the theme park operator told guests.

Advertisements

8 thoughts on “Disney Skyliner Returns to Service

  1. Douglas October 14, 2019 / 4:31 pm

    Any thoughts on the cause? Your report hints at staff error as well as some sort of mis-adjustment or such?

    Like

    • Donald Reif October 14, 2019 / 7:02 pm

      The spacers in one of the terminals malfunctioned, from the photographs.

      Liked by 1 person

  2. Martin Zacek October 14, 2019 / 11:46 pm

    Anticollision monitoring should avoid collisions, but you can reset and go …till nothing moves anymore. ;-)

    Liked by 1 person

    • Jared October 15, 2019 / 3:16 am

      Exactly. Operator error without eyes on the situation.

      Liked by 1 person

  3. Chuck October 17, 2019 / 10:44 am

    Technical question if I may. Are the station guideway wheels driven by haul rope PTO or independently of the haul rope?

    Like

    • John October 19, 2019 / 12:35 pm

      Typically, they are driven by the haul rope through a PTO belt system. Spacing takes place with a variable-speed motor driving a section of tires. Older spacers were driven as part of the overall tire system, with magnetic clutches that would switch back and forth between two different sets of bulleys for either advancing or retarding carriers. I’m not sure of the setup on the Skyliner but I assume it’s fairly standard.

      Like

      • chuck October 19, 2019 / 5:00 pm

        Thanks John,
        I was under the impression – assumption most likely – they were independently powered from the haul rope.

        Like

  4. Kevin Gawenus October 23, 2019 / 1:48 pm

    I just rode most of the system Oct 21st, late in the evening. A prefect place to watch the fireworks shows from IMO (though that was by accident). Rode the Hollywood studios and Epcot lines in both directions (long story on why).

    The system was running very smoothly and was gobbling up fairly large crowds as they came out when each park closed for the night. One Dad/family I rode with and had ~2-3 years olds commented “These are so much better than buses, why can’t they just replace all the buses with these things”.

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s