Angel Peak #6 – 49° North, WA

Lift overview. This one came from Copper Mountain.
Loading area and lift shack.
Lift line.
Yan return tension terminal.
Another view of the base.
Top breakover.
View down from the summit.
Unload ramp and operator house.
Tower 19.
Fixed motor room.
Upper part of the lift line.
Middle line.
View down.
The first two towers.

7 thoughts on “Angel Peak #6 – 49° North, WA”

  1. Jeff Lynne July 23, 2017 / 3:15 pm

    Is this the High Point lift from Copper Mountain?

    Liked by 1 person

    Reply
    • BarkeeStone March 23, 2020 / 3:54 pm

      Likely yes.

      Like

      Reply
  2. CVS October 22, 2017 / 7:37 pm

    It was High Point Lift before traveling North

    Like

    Reply
  3. Greg April 28, 2020 / 6:07 pm

    Were the lifting frames added after the move from Copper? Or are they original?

    Like

    Reply
    • Utah Powder Skier May 7, 2020 / 4:12 pm

      The lifting frames were definitely added during the relocation. At Copper, the High Point lift didn’t have lifting frames.

      Like

      Reply
      • pbropetech November 20, 2021 / 5:20 pm

        I wish old H had had the lifting frames. Using the ‘portable’ a-frame was a chore and a half.

        Liked by 2 people

        Reply
        • Ben Eminger February 5, 2022 / 6:44 pm

          We have a similar setup for the Riblet & SLI’s, that thing is a definitely a chore to say the least!
          Here’s the full video of it’s current setup.

          Liked by 1 person

Leave a reply to Utah Powder Skier Cancel reply