Canyon Express 16 – Mammoth Mountain, CA

Yan detachable with Doppelmayr equipment and Mammoth-supplied enclosure.
Lift Engineering teardrop chairs with Doppelmayr grips and hangers.
Tower 14.
The breakover.
Middle part of the line.
Tower 2.
Drive station.
Side view of the top terminal.
Doppelmayr Worldbook entry.

15 thoughts on “Canyon Express 16 – Mammoth Mountain, CA

  1. Kaden K August 11, 2019 / 6:38 pm

    is it just me or does the line guage on Yan high speed lifts seem smaller than leitner-poma and doppelmayr?


    • Donald Reif August 11, 2019 / 7:35 pm

      I don’t see any of that on Carpenter at Deer Valley (which was converted from a Yan, though unlike most of the Doppelmayr and Poma conversions, Garaventa CTEC completely replaced the terminals on Carpenter to do the conversion).


  2. Oliver Goh November 11, 2019 / 1:15 pm

    Why is the line speed on this lift 900 while the other converted Yan is 1000?


    • Thomas Jett November 11, 2019 / 1:18 pm

      That may be a mistake on Peter’s part. In my experience, 1 also has has a reduced line speed.


      • Peter Landsman November 11, 2019 / 7:12 pm

        So I looked at the Yan records and 1 can actually only go 850 while 16 is 900. They were built different years.


        • Kirk November 11, 2019 / 7:46 pm

          900 fpm because, the spacing is at 90′ with 6 a second interval.


        • randomguyu March 12, 2021 / 11:20 am

          where did you get the records?


  3. Raj Thorp January 27, 2020 / 9:08 pm

    This lift has the worst looking terminals; worse than standard CTEC hit speed chairs


    • Donald Reif January 27, 2020 / 10:17 pm

      These were refitted Yan terminals, mind you. Of course, what sets these and June’s DoppelmaYans apart from most DoppelmaYans is that on the other DoppelmaYans, the terminals were essentially modified to take on the appearance of Spacejets with no underskin (like Sun Valley and Schweitzer), or outright replaced with new Spacejet terminals (Whistler).


    • pbropetech January 28, 2020 / 2:04 pm

      As a mechanic I think they look great- lots of room inside instead of some cramped enclosure with no headroom.


      • Raj Thorp February 15, 2020 / 3:34 pm

        Mainly what I meant was the terminal skin and paint at the top


  4. Kirk March 12, 2021 / 11:53 am

    Mammoth 16, 900 fpm, 90′ spacing @ 6.0 sec interval. Mammoth 1, 850 fpm, 85′ spacing @ 6.0 sec. Both 2400 pph. This data is from the 1996 Doppelmayr conversion.


  5. Marcus June 24, 2021 / 8:51 am

    Has Alterra said anything about this chair’s now-twice-delayed replacement?


    • skitheeast June 24, 2021 / 9:51 am

      Nothing has been said publicly.

      My two cents is that it would be nice of them to upgrade to an eight-pack instead to show that the extra delay resulted in a better lift.


      • Marcus June 24, 2021 / 11:29 am

        An 8 would be nice, but at this point it needs _something_. Of course, my preference would be to turn the existing top terminal into a midstation and continue to the top of 5, or better yet, the top of Dave’s, but yeah yeah I know.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s