Priest Creek – Steamboat, CO

IMG_1634
Lift line view.
IMG_1641
This Yan lift has Heron-Poma chairs.
IMG_1646
View up the line from the base terminal.
img_4865
The top station has a vault drive.
img_4874
Looking down from the summit.
img_4875
This lift is only used on weekends and holidays as relief for Sundown Express.
img_4879
Lower part of the lift line.
img_4884
Bottom station from above.

44 thoughts on “Priest Creek – Steamboat, CO

  1. Donald Reif May 26, 2019 / 2:17 pm

    A Yan return station and Yan towers, but Heron Poma chairs and a Heron Poma vault drive.

    Like

    • pbropetech December 11, 2019 / 12:05 pm

      Only one Yan tower. The rest are a different model of Heron, the last before they went bankrupt as far as I know. Steamboat had a few different lifts of different manufacturers that they had replaced the original bottom terminals with Yan for some reason.

      Like

      • Donald Reif December 11, 2019 / 1:23 pm

        Christie II was the same story, I think. It was entirely Heron-Poma except for its bottom terminal, which was a Yan. In that case, I think Yan replaced the Christie II loading area when they built Christie III, as the Christie II and III loading terminals shared a center mast.

        Like

      • Max Hart December 16, 2019 / 3:37 pm

        The Snowdon Triple at Killington (1973) has similar Heron-Poma towers and crossarms. Not the style seen on the old North Ridge Triple, but a reinforced variant of the crossarm seen on this lift.

        Liked by 2 people

        • Donald Reif January 14, 2020 / 9:36 am

          Now I see the similarity.

          Like

    • Bill Fetcher December 29, 2021 / 9:37 pm

      That’s correct, Lift Engineering (YAN) relocated the base terminals of both the Priest Creek and Four Points lifts in 1983 to reduce congestion. Priest Creek was installed in 1972, the first on the mountain to be planted by helicopter as opposed to having a construction road cut to each tower footing site. It would be supplemented in 1983 by the Sundown triple chair (YAN) and would assume standby duties in 1992 when the present Sundown high-speed detachable quad chair (Doppelmayr) is installed. It would be run in the mornings for Ski Patrol to keep it loosened up and certified as well on busy days. It was removed last summer (2021).

      Liked by 1 person

      • Bill Fetcher January 4, 2022 / 7:48 pm

        Correction (my mistake). The Priest Creek Lift is still in place however the chairs had been removed to be sold at auction. This was my first day skiing on “the mountain,” this season, which allowed me to look over coming changes. With other upgrades going on I guess it was felt that removing a lift could be postponed. (The lift could have been used today, 4 January, as the maze for the Sundown Express was packed.)
        Bill Fetcher

        Like

        • Ryan January 4, 2022 / 8:20 pm

          I bet they were thinking the same thing today.. moved too quickly to get rid of her.

          Like

        • Donald Reif January 4, 2022 / 9:10 pm

          This sort of abandoned state reminds me of the abandoned state Winter Park kept Outrigger in for a few years before they reinstalled it in Vasquez Cirque as Eagle Wind.

          Like

  2. powderforever45 November 17, 2019 / 12:21 pm

    I have been going to steamboat for 9 years and I have almost never seen this lift run.

    Like

    • Teddy's Lift World January 14, 2020 / 1:28 pm

      On what occasions did it run? Wind hold? Maintenance issues? Skier traffic?

      Like

      • Mike B February 10, 2020 / 3:16 pm

        It’s run during Christmas holiday season last couple times I visited. I even took it a few times b/c it was ski-on while the line for Sundown Express spilled out of the corral.

        Like

  3. Larry Schroeder February 10, 2020 / 2:24 pm

    I remember when the loading area for Priest Creek was lower near the original Elkhead lift. Both with Heron-Poma equipment. Priest Creek got the Yan bottom terminal when Yan put in the F/G Sundown triple lift.

    Liked by 1 person

    • Donald Reif February 10, 2020 / 3:22 pm

      And Elkhead’s fixed grip quad went in just a year after the Sundown triple went in.

      That at least explains why the lift has a Yan return station while everything else is Heron-Poma. I wonder how many towers had to be removed during the modification.

      Like

  4. Collin Parsons March 11, 2020 / 9:49 pm

    When I went to Steamboat for Christmas 2015, this lift ran all the days I was there. It was very crowded with Sundown having a 15-20 minute line at times.

    Like

  5. sullivanq March 12, 2020 / 6:00 am

    haha try going to wachussett mountain on a bluebird. 30 minute lift line, minimum. They could really use some more terrain, but the treehuggers won’t let em.

    Like

    • Billuh August 21, 2021 / 9:11 pm

      Because privileged white people recreation is the most important consideration. Got it.

      Like

  6. Miles Gately February 27, 2021 / 6:33 am

    This lift has been closed for over 5 years and it finally opened on 2-27-21!

    Liked by 1 person

    • Ryan February 28, 2021 / 1:55 pm

      She’s turning today too.

      Like

  7. Miles Gately March 12, 2021 / 8:30 pm

    I really want this lift to start running again, it is the only lift i have not been on!
    And I am only 9 years old!

    Like

    • Myles Svec March 12, 2021 / 8:46 pm

      This lift will only run on busy days so I am guessing you will be able to ride it soon with Steamboat getting progressively more busy every year.

      Like

  8. Miles Gately March 12, 2021 / 8:45 pm

    It says on there app that it is the longest lift to get up on, it takes 9.8 minuets to get up priest creek. How slow does this lift run?

    Like

    • Myles Svec March 12, 2021 / 8:50 pm

      It runs 500 feet a minute. Quite fast for a fixed grip if I am correct.

      Like

    • Utah Powder Skier March 12, 2021 / 9:03 pm

      500 fpm is the max a lift can run without a loading carpet.

      Like

      • Myles Svec March 12, 2021 / 10:07 pm

        What is the max with a loading carpet?

        Like

        • chasehausman March 13, 2021 / 1:34 am

          Depends on the number of passengers. Max speed is also dependent on the difference in speed between the carrier and the passengers during loading and unloading. As of ANSI B77.1-2017, with a loading carpet you can load a double at 550fpm (2.8m/s), unload at 600fpm (3m/s), load a triple at 500fpm (2.5m/s), unload at 575fpm (2.9m/s). A quad or more can only load at 450fpm (2.3m/s) and unload at 525fpm (2.7m/s). Again, all relative to the speed of the conveyor. The conveyor itself can only go up to 200fpm (1m/s).

          Like

  9. Miles Gately March 13, 2021 / 8:51 pm

    I wonder if this will open any time soon?

    Like

  10. Mark Hackett June 9, 2021 / 9:38 pm

    Are they going to sell the chairs when they take it out for the new improvements going in?

    Like

    • Myles Svec June 10, 2021 / 7:02 am

      Not sure, I would buy a chair if they are selling though.

      Like

    • Myles Svec August 20, 2021 / 2:12 pm

      They are selling the chairs on the 24th to the 27th

      Like

  11. Carson August 23, 2021 / 10:54 pm

    R.I.P.

    Like

  12. Ryan August 24, 2021 / 8:04 am

    Whelp.. I just placed a bid for one of the chairs. We’ll see…

    Like

  13. Mr.Co.Ski September 1, 2021 / 1:51 pm

    Any idea what the minimum winning bid was? Saw 600+ bids over three days for 125 chairs, but haven’t heard any intel on what it took to actually get one.

    Like

    • Ryan September 1, 2021 / 9:32 pm

      I put a bid in for $1000 and have not been contacted yet.

      Like

      • Nahms September 21, 2021 / 10:20 am

        $1k! Dang!

        Like

        • Myles Svec November 6, 2021 / 3:03 pm

          I heard you had to bid about $1,600 to get a chair

          Like

  14. Miles Gately January 31, 2022 / 7:29 pm

    I haven’t been to steamboat since the Priest Creek removal, are both the terminals, and all the towers gone?

    Liked by 1 person

    • Myles Svec January 31, 2022 / 8:15 pm

      No, the chairs are the only thing that’s gone.

      Like

  15. Miles Gately February 3, 2022 / 7:58 pm

    Okay, so just to be clear the chairs are the only thing thats gone, the rest is still there?

    Like

    • Donald Reif February 3, 2022 / 8:37 pm

      Yes. Think “Outrigger at Winter Park circa 2004-2005.”

      Like

  16. Miles Gately February 5, 2022 / 9:05 am

    Do you know when they’re going to remove the stations or the towers?

    Like

    • Bill Fetcher February 5, 2022 / 3:41 pm

      The Priest Creek lift will likely be removed this coming summer once the snow is gone.

      Like

  17. Jack T February 27, 2022 / 7:25 pm

    Haven’t been to Steamboat since Feb 2015, and I feel really fortunate that this lift was running then so being the f/g—loving kid I was, I naturally took a ride on it. Sad to see it go

    Like

  18. Tyler Baroody October 21, 2022 / 4:54 pm

    Is it standing in October 2022?

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s