Three Bears – Copper Mountain, CO

Tucker Mountain became lift served in 2019 with the addition of a Leitner-Poma triple.
This area was previously serviced by snowcat.
The bottom terminal is an Alpha model.
Loading area.
Riding up the steep lift line.
Tower 4.
View down the lower part of the line.
T7.
The upper half of the lift is above treeline.
Looking down near the summit.
Breakover towers.
Tower 9.
The top terminal has a Skytrac operator house.
Unloading ramp.
Upper terminal overview.
Leitner-Poma tower head.
Another view of the return bullwheel.
Middle part of the lift line.
Tower 6 with Blackjack chair in the background.
View up the line from below.
There are 87 chairs on the line.
Tower 4 with combination assemblies.
View down at T3.
Looking up the line.
Tower 1.
View near the bottom terminal.
Motor room and loading area.
Lift overview.
The top of tower 4.
A triple chair without footrests.
Tower 10.
The summit breakover.

17 thoughts on “Three Bears – Copper Mountain, CO

  1. Donald Reif January 9, 2020 / 10:01 am

    I think this is unofficially the highest triple chairlift in Colorado.

    Like

  2. BarkeeStone January 9, 2020 / 10:53 am

    Such beauty this lift is and how shiny the metal on the chairs and towers.

    Where is the new terminal for Blackjack gonna be on this site?

    Like

    • Donald Reif January 9, 2020 / 12:09 pm

      It’s already here.

      Like

  3. Somebody January 9, 2020 / 2:22 pm

    Is it a low snow year or is that terrain extremely rocky?

    Like

    • Donald Reif January 10, 2020 / 6:54 am

      I think the terrain is very rocky. Also the upper section is very windswept.

      Like

      • Chris January 10, 2020 / 10:42 am

        I skied from the about where the lift ends last year to the bottom of Blackjack when we snatched a hike on a snowcat that was supposed to carry a group that didn’t show up. While the catwalk on top looked very rocky, and there were very rocky patches at the very top you could clear them easily on the snow fields, and the terrain below was a lot of fun.

        Like

  4. powderforever45 January 9, 2020 / 2:49 pm

    Why did they decide to go with the Skytrac operators house for the top bullwheel?

    Like

    • Donald Reif January 14, 2020 / 9:56 am

      Skytrac was building the modified bottom station for Blackjack, so maybe they offered to split the project with LPA.

      Like

    • pbropetech January 14, 2020 / 3:40 pm

      We bought a new lift house to go with the new bottom of 4, but the Skytrac one was easier to lift to the top of the mountain with the helo so we put it up there instead.The LP shack that was supposed to go at the top of 5 is at the bottom of 4.

      Liked by 1 person

  5. Donald Reif January 10, 2020 / 12:45 pm

    It’s interesting to consider that this lift has bars, making it the only fixed grip off the front face of the mountain to have them. The only lifts out of this area are Yan doubles that don’t have bars.

    Like

    • Kaden K January 20, 2020 / 8:51 am

      I’m sure copper wishes blackjack and mountain Chief have bars too.

      Like

      • pbropetech January 20, 2020 / 11:21 am

        I can’t speak for the rest of Copper but I’m glad they don’t. One more thing to take care of. Plus we would have to modify 194 chairs to accept comfort bars as they didn’t originally come with them.

        Like

        • Donald Reif January 20, 2020 / 5:28 pm

          The safety bars are pretty easy to outfit. I mean, I just have to point to Vail adding safety bars to the Canyons lifts that didn’t have them before the merger of Canyons with PCMR.

          Like

        • pbropetech January 23, 2020 / 10:19 am

          I’m not saying it can’t be done- just that it’s more difficult than you think. There is no attachment point for comfort bars on those chairs, so we would have to have a kit designed (or contact VR to see where they got theirs) and then set up to install them on all those carriers. Lots of grinding off paint and welding.

          Like

  6. Kaden K January 20, 2020 / 8:52 am

    It’s too bad they didn’t make these chairs copper colored.

    Like

    • pbropetech January 20, 2020 / 11:21 am

      But we won’t have to repaint them every couple of years….

      Liked by 1 person

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s