Pallavicini – Arapahoe Basin, CO

This lift replaced a Yan double chair with identical speed and capacity.
Leitner-Poma Alpha drive station.
Side view of the bottom terminal.
View up at tower 1.
Riding up the line.
This lift has lots of combination assemblies due to its profile.
Tower 6 of 12.
View back down at T6.
Tower 9.
Arriving up top with Lenawee and Beavers lifts in the background.
Unloading area and top operator hut.
An Omega double chair.
Breakover towers.
View down at T10.
Looking up at the top breakover.
Leaving the bottom station.
T4.
The steep lift line.
Return terminal.
Another view of the top station.
Lift overview.

14 thoughts on “Pallavicini – Arapahoe Basin, CO

  1. Myles Svec's avatar Myles Svec December 24, 2020 / 3:37 pm

    A Basin did a great job building this lift. It’s beautiful.

    Liked by 2 people

  2. Donald Reif's avatar Donald Reif December 24, 2020 / 6:57 pm

    It sure looks different seeing the lift without any big flyovers on the light side.

    Like

  3. Domenic Policaro's avatar Domenic Policaro May 20, 2021 / 11:30 pm

    The ride stays the same

    Like

  4. Ryan's avatar Ryan May 23, 2021 / 1:09 am

    It is a beautiful lift.. Poma can be proud.

    Like

    • Michael's avatar Michael May 23, 2021 / 8:16 am

      Leitner Poma…

      Like

  5. Joshua's avatar Joshua January 11, 2022 / 9:23 pm

    Why replace if it has same speed and capacity? Was the old lift unreliable?

    Like

  6. Mishers's avatar Mishers May 14, 2024 / 6:53 pm

    I think this should be a top drive the bunny hill lifts drive is at the top.

    Like

    • Aidan Reilly's avatar Aidan Reilly May 14, 2024 / 8:26 pm

      Disagree. The ridge up top is super narrow. There’s barely a road to get up there, and I can only imagine setting an Alpha up there would be a construction nightmare. Besides, the lift maintenance shop is no more then 500 feet away from the bottom terminal.

      Like

    • Liam's avatar liam May 14, 2024 / 10:14 pm

      Agreed with Aidan’s comment. This lift goes far from power lines. Cannot have top drive.

      Like

    • Duck's avatar Duck August 1, 2025 / 2:10 pm

      Call up the local power/electrical contractor and get a quote for a 3500 foot run of three phase over a 1000’+ vertical rise.

      Liked by 1 person

  7. WH2OSHREDDER.'s avatar WH2OSHREDDER. October 4, 2024 / 2:29 pm

    Stunning Lift !

    Like

  8. Coloradoskilifts's avatar Coloradoskilifts April 20, 2025 / 1:09 pm

    One of a few lifts that goes straight from the base area to above timberline.

    Like

Leave a reply to Ryan Cancel reply