South Peak – Caberfae Peaks, MI

This Riblet triple services the southern summit at Caberfae Peaks.
Riblet drive-tension station.
Side view of the loading station.
Counterweight pit and motor room.
Riding up the lift line.
View back down near the summit.
Arriving at the return.
Top bullwheel.
Lower lift line.
Departing the bottom station.
Riblet fixed return terminal.
The last few towers.

6 thoughts on “South Peak – Caberfae Peaks, MI

  1. HillOrStream's avatar HillOrStream February 19, 2021 / 7:29 pm

    I noticed about 20 percent of the tabs are new, then I noticed the cable looks new too, anyone know? They keep this lift well maintained, bet they are happy they did it with tab failures elsewhere recently including some serious injuries at Indianhead.

    Like

    • pbropetech's avatar pbropetech June 12, 2022 / 10:17 am

      What do you mean by ‘tabs’?

      Like

      • William's avatar William February 27, 2026 / 5:25 pm

        He probably means the insert clips.

        Like

  2. HillOrStream's avatar HillOrStream March 1, 2021 / 11:16 pm

    I don’t think the vertical climb in the chart is right for South Peak. South Peak lift has 74 chairs total, compared to 66 chairs on each of the two North Peak lifts, and it is a steeper hill.

    Like

    • hillorstream's avatar hillorstream June 12, 2022 / 10:49 am

      Riblet chairs connect to the cable via a tab that is twisted into the haul line, where most other brands use a clamp. They didn’t replace the haul line, BTW.
      Vista has a 485′ vertical, South Peak is something like 475′ but I’m trying to get an official number on that. Not sure why the data here is so off, maybe based on the original geography.

      Liked by 1 person

      • Somebodyelse's avatar Somebodyelse July 25, 2022 / 7:03 pm

        Terminology – Riblet’s connection to the “haul rope” is via a “clip”, not a tab.

        Like

Leave a reply to HillOrStream Cancel reply