Chair 2 – Mt. Baker, WA

IMG_7763
Looking down the lift line from the top station.
IMG_9069
Height adjustable top bullwheel.
IMG_9081
Bottom drive station, also height adjustable.
IMG_9107
Looking down the line.
mt baker 021
Summer view of Chair 1 crossing over Chair 2.
mt baker 035
Bottom terminal in the summer.

4 thoughts on “Chair 2 – Mt. Baker, WA

    • AvocadoAndy October 25, 2018 / 4:43 pm

      The SkyTrac replaced Chair 7, located on the western part of the mountain. The intersection goes between Chair 1 and Chair 2, which are located on the eastern part of the mountain. You may be thinking of the Doppelmayr CTEC Quad that replaced the original Chair 1 in 2008, which does cross over Chair two much like the previous one but does not share a tower with it. They just made a really tall tower after the tower of Chair 2, likely because it would be difficult to make the towers of the Riblet Quad compatible to mount a Doppelmayr tower on top of.

      Liked by 1 person

  1. Riley April 12, 2022 / 1:54 pm

    So despite the original Chair 1 being removed, this lift still has a 1954 Riblet tapered tube tower. Pretty cool.

    Like

    • pbropetech April 12, 2022 / 9:33 pm

      Not really. The shared tower was installed with chair 2 in ’64; before that chair 1 did not need a tower there as it was essentially neutral approaching the midstation. I could pick the rope off by hand after removing the opposing sheave there. The shared portion was engineered in to ensure that chair 1 did not sag too close to chair 2 under load. Sorry to burst the bubble.

      Like

Leave a Reply to pbropetech Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s