Chair 3 – Mt. Baker, WA

IMG_9033
Drive terminal on the White Salmon side.
IMG_9036
Riding towards Heather Meadows.
IMG_9051
Mid-unload in both directions.
IMG_9083
Midstation.
IMG_9085
Looking down towards the drive terminal.
IMG_9092
Custom Doppelmayr CTEC diesel drive terminal.
IMG_9159
Height adjustable return bullwheel.
IMG_9168
Looking down the line towards Heather Meadows.

10 thoughts on “Chair 3 – Mt. Baker, WA

  1. AAALLLLLEEEEXXX's avatar AAALLLLLEEEEXXX May 18, 2020 / 7:53 am

    i personally think doppie chairs look really bad without bars

    Like

    • Mason Schade's avatar Mason Schade May 18, 2020 / 3:41 pm

      These aren’t Doppelmayr, these are late Garaventa CTEC chairs.

      Like

    • Joe Blake's avatar Joe Blake June 14, 2020 / 10:09 pm

      Until Zop retired, comfort bars were anathema. I agree that there’s something off, though. I kinda think the only CTEC lineage carriers that had any flair were the 70s Thiokols, pacifier bars or not. (I really, really dig the old Dopp triples, but that’s pre-merger by much years.)

      Like

      • pbropetech's avatar pbropetech June 19, 2020 / 11:00 am

        Did you know Zop? Also, I dig the term ‘pacifier bars’. I may have to steal it- I’ve always hated when people call them ‘safety bars’.

        Liked by 1 person

        • colecochran's avatar colecochran October 28, 2025 / 11:18 am

          I’ve been lucky enough to work with Zop the last couple years, he is a wealth of knowledge. He some how taught a group of inexperienced volunteers how to replace a haul rope.

          Like

        • pbropetech's avatar pbropetech October 28, 2025 / 11:30 am

          It’s Zop’s fault I’m still a mechanic. He definitely has been there and done that.

          Like

  2. Jay Cassady (@JS_Cassady)'s avatar Jay Cassady (@JS_Cassady) December 12, 2022 / 2:46 pm

    These chairs have since had bars added, same with Chair 5 @ Baker. Second year working up there and these chairs are absolutely brutal to bump.

    Like

    • Jay Cassady (@JS_Cassady)'s avatar Jay Cassady (@JS_Cassady) December 12, 2022 / 2:47 pm

      Also any idea if you could change the chair name to Chair 3/4? That’s what we actually call it ;D

      Like

      • pbropetech's avatar pbropetech December 12, 2022 / 5:01 pm

        Probably a holdover from when we had a separate chair 4 :)
        I bet this one is more difficult to bump than the old one. I could pick the old chairs up by myself, they were so light.

        Like

        • Joe Blake's avatar Joe Blake October 3, 2025 / 9:11 pm

          Even loading backward with no bump didn’t hurt. Falling off did, at least my pride, but that’s not M-L’s fault.

          Like

Leave a reply to Joe Blake Cancel reply