The short lift line.Looking up from the base.Loading area with new lift shack.Leaving the tension station.Fixed drive up top.Doppelmayr supplied aftermarket lifting frames.
Chairs are definitely a Riblet design, and according to what Peter said above, they either came from Breck or were custom made. The grips look like Yans, the wavyness between the grip itself and the hanger gives it away. Here’s another Yan fixed grip (from Chair 13, a Yan Double at Mammoth Mountain, CA) from the same time period for comparison: https://skiliftblog.files.wordpress.com/2017/04/img_3277.jpg
Yes. I was thinking about the tower cross arm and assembly install Pete did on that lift from Doppelmayr. The grip is Yan, the chair may be a Riblet design but they were purchased new from Superior tramway I believe ( Riblet Parts supplier). Sorry for the mis informed reply. I should’ve looked at the picture. Ive known that grip for 18 years now, I should recognize it anywhere.
Lift Blog 
Where did the riblet Chairs come from on this and A51?
LikeLike
I believe they were purchased new.
LikeLike
they were added in 2006 after riblet shut down
LikeLike
According to Skilifts.org, they either came from Chair 4 at Breck or were custom fabricated by Superior Tramway or Tram Support Inc.
LikeLike
where did you find that out? It dosent say on the skilifts.org page for discovery or A51 about riblet chairs
LikeLike
http://www.skilifts.org/forum/index.php?showtopic=6880&st=0
LikeLike
Those are Doppelmayr chairs and grips. Not Riblet, Not YAN.
LikeLike
The grips are possibly Doppelmayr. I’m sorry but that just isn’t true about the chairs, they are definitely Riblet.
LikeLiked by 1 person
Chairs are definitely a Riblet design, and according to what Peter said above, they either came from Breck or were custom made. The grips look like Yans, the wavyness between the grip itself and the hanger gives it away. Here’s another Yan fixed grip (from Chair 13, a Yan Double at Mammoth Mountain, CA) from the same time period for comparison: https://skiliftblog.files.wordpress.com/2017/04/img_3277.jpg
LikeLike
Yes. I was thinking about the tower cross arm and assembly install Pete did on that lift from Doppelmayr. The grip is Yan, the chair may be a Riblet design but they were purchased new from Superior tramway I believe ( Riblet Parts supplier). Sorry for the mis informed reply. I should’ve looked at the picture. Ive known that grip for 18 years now, I should recognize it anywhere.
LikeLiked by 1 person
This lift was originally known as Checkerboard until the late 1990s/early 2000s.
LikeLike
Here’s a picture of the lift when it was built. In the background you can see the return station for Packsaddle II.
LikeLike
*Packsaddle I
LikeLike
When did Doppelmayr put tower heads on the towers? When it was built there were none.
LikeLike
The lifting frames on Discovery and A-51 were added in 2013.
LikeLike
This lift has an unnecessary amount of signs!
LikeLike
beginner lift.
LikeLike
This lift has all the signs required by the CPTSB.
LikeLike
Here is what the lift looked like before it was refurbished:
https://www.skiresort.info/ski-resort/keystone/ski-lifts/l46276/
LikeLike