Park City’s King Con Express Taking Shape
The same K-Max from Timberline Helicopters that I watched in Jackson Hole a few weeks ago flew the tower heads for the new King Con Express at Park City the same week. 14 of King Con’s 15 tower tubes were re-used from the previous CTEC detachable quad. Most of the new six pack towers have short extensions to make them taller.
Not much has changed at the bottom terminal except a pit was poured for the loading carpet. Windows are being installed at the top drive terminal. The haul rope spool was delivered to the flats between towers 4 and 5. The six-person chairs are still down in Park City’s main parking lot. King Con Express and Motherlode Express are both further along than the Quicksilver Gondola, which still needs towers and a mid-station. Still, an impressive amount of work has taken place and I have no doubt Vail Resorts will have everything ready by November for Park City’s first season as America’s largest resort.
Touring Utah’s Newest Ski Resort
Utah may have lost a resort last month but now it has another. I recently got the chance to tour what will be America’s first new ski resort since Tamarack Resort opened in 2004. Cherry Peak Resort is under construction just outside of Richmond, Utah. It is named after the 9,765 foot peak nearby but the ski area will not even reach 8,000 feet. The resort was scheduled to open last season but never got enough snow and construction fell behind. Cherry Peak Resort is owned by local developer John Chadwick and located entirely on his private land. He has been quietly working to build the ski area for the past five years while buying used lifts and equipment. To call Cherry Peak a resort is a stretch but this will be a nice community ski area with 1,265 vertical feet of skiing and three lifts.
Chadwick is currently running the ski lift version of a chop shop with used Yan lifts from across the west being cobbled together into three new triple chairs. Two lifts, dubbed Gateway and Vista are completed and load tested. Gateway was Blackcomb’s former Crystal Chair while Vista came from Sunnyside at Sun Valley. Cherry Peak also bought multiple used lifts from Squaw Valley in 2012.
Park City Quicksilver Gondola August Update
Construction on Park City’s new lifts has noticeably shifted towards the new Quicksilver Gondola since my last update a few weeks ago. Steel for the drive and return terminals is going up and there is only one tower left to pour concrete for. The angle station is the least far along with just holes in the ground at this point.
The return terminal is going up next to the new Miners Camp lodge and Silverlode lift. A cabin parking facility will be here and it appears it will be big enough for all the cabins, unlike the small maintenance bays at the Red Pine Gondola and Orange Bubble Express. It looks like for the first year it will just have rails and no roof. I’m guessing a building will be built over the whole thing another year.
Quicksilver will have 27 towers numbered from the drive terminal in White Pine Canyon. There are only four towers in what used to be Park City Ski Area. I did not realize until now that there will be a massive span over Thaynes Canyon that will rival the existing Red Pine Gondola with cabins at least 200 feet in the air. Evidently Park City traded lower wind tolerance and a difficult evacuation scenario for fewer towers and a shorter lift.
Follow Us on Instagram
Liftblog.com is now on Instagram! Check us out @lift_blog for all the latest photos and updates or on the web at https://instagram.com/lift_blog/
Did Northstar California Build a New Gondola in Three Months?
It appears Northstar California replaced most of its Big Springs Gondola in just three months between the end of last winter and the start of this summer. The bottom terminal of this 1985 Doppelmayr 6-passenger gondola was previously relocated in 2004. From the below pictures on Instagram, it appears Doppelmayr installed brand new terminal equipment inside of the existing terminal buildings along with new Agamatic grips, hangars and line gear. The first-generation CWA cabins were previously refurbished in 2013. Maybe Vail Resorts got a ‘buy eight get two free’ deal on Uni-G terminals from Doppelmayr this summer.
Lift Profile: Tote Road Quad at Loon Mountain
News Roundup: Adding Lifts
- The Balsams mega-project gets snowmaking water permit and releases its phase one plan which includes six new lifts. That will be the contract of the year next summer if it really happens.
- The owners of Saddleback have extended the deadline to find financing for a new lift before pulling the plug on this season.
- Mt. Rose Ski Tahoe announces an $11.00 minimum wage for all resort employees next season.
- Kitzbuhel in Austria will add another 8-passenger bubble lift for next season to be built by Leitner.
- France’s Avoriaz also announced a new Poma six-pack.
- Whistler will add the Creekside Gondola to its Bike Park starting Friday. The gondola has been outfitted with the latest Deasonbuilt center-pole bike carriers. Creekside will become Whistler-Blackcomb’s 11th lift open for summer operations including three gondolas and six detachable quads.
- The Neptuno double chair (Poma) in Las Lenas de-roped off 5 towers last week thanks to an avalanche. See photo below.
Instagram Tuesday: Heavy Lifting
Teton Quad Going Vertical
August is when most new lifts really start to take shape. After months of digging, tying re-bar cages and pouring concrete, the public always seems to wonder whether the lift is going to be done on time. I’ve been hearing it for weeks from locals on the tram here. Then towers get set in a matter of hours and the perception changes. Terminals go up almost as quickly.
The Teton Lift is at that point with towers and terminals going vertical. The Ranch parking lot is getting emptier by the day as terminal parts make their way up the hill for installation. Trail crew is finishing grading the new trails and working on erosion control.
The return lift shack arrived from Salt Lake last week and boy does it have a lot of buttons. An automated maintenance lock-out mode. ‘Start drive station unmanned.’ A really large touchscreen. I can only imagine the drive controls will look like. Remote start will be especially nice on a lift with a top drive terminal in a very rugged spot. On big storm nights, JHMR already has three “night creatures” at the top of the gondola, tram and Thunder to start lifts. (and in the case of the tram, to start digging out the top dock.) The top of Teton will definitely have patrol and possibly a fourth night man.
Lift Blog 