Leitner-Poma is busy this summer at Okemo Mountain Resort installing one new lift and turning the Jackson Gore Express into Quantum Four, Vermont’s fourth lift with bubble chairs. The new Sunshine Quad will have 11 towers and provides access to a new real estate development called South Face Village. As of this week, all concrete footings are finished and steel is going up. It will have a bottom drive/tension Alpha terminal with a fixed return up top.
The single chair at Mad River Glen in Vermont is not the only single chair around but it’s certainly the newest, nicest and most famous. Originally built in 1947-48 by American Steel & Wire Company, it has hauled skiers up Stark Mountain for the past 65 years. The chair at MRG was AS&W’s 15th and cost $75,000 not including installation. Originally powered by a diesel motor, it had no electrical circuit at all during the early years. Safety systems on towers and bullwheels were added later. In 1995, Mad River Glen became the first ski area member-owned co-operative in the United States and it still does not have any slopeside lodging nor does it allow snowboarding.
By 2005, the diesel-powered single chair had become too expensive to maintain. Chairs were failing NDT, the lift had no cable catchers or bullwheel retention and replacement parts were no longer available (except ones cannibalized from the AS&W single that had been replaced at nearby Stowe.) Doppelmayr CTEC was brought in by the co-operative’s Board of Directors and developed two proposals – a $1.54 million rebuild of the single chair or an all-new double chair for $300,000 less.
New England ski areas are building three new lifts this summer and all of them happen to be in Vermont. At Sugarbush, the Valley House double (a 1960 Carlevario-Savio) is out and a Doppelmayr fixed-grip quad is going in. At some point the old lift got a new Poma Alpha drive terminal and Borvig chairs. The perfectly good Poma terminal is off to West Mountain on the other side of Lake Champlain in New York. Sugarbush’s new lift looks like it’s going to have the Tristar-model terminal like many other recent Doppelmayr lifts in New England. The bottom terminal has been moved downhill to be much closer to the Super Bravo Express than the old lift. This will be Sugarbush’s 8th quad chair between Lincoln Peak and Mt. Ellen. Doppelmayr still has a ways to go on this project with just a couple towers and sections of both terminals standing but all the important concrete work is done.
Doppelmayr is on a roll at Park City with haul ropes spliced and tensioned for the new King Con Express and Motherlode Express lifts. In case you’ve been living under a rock, King Con is a brand new Uni-G model six pack with a loading carpet while Motherlode is a recycled Garaventa CTEC detachable quad moved from the King Con line. Both are nearly finished 50 days before opening day.
Over at the Quicksilver Gondola, which connects Park City to the former Canyons Resort, the drive terminal is getting a loading platform and what looks like a small cabin maintenance building. A bunch more cabins have arrived from Switzerland; the highest number I saw on a gondola was 61. The angle station is going up now with a crane setting bullwheels today. This station is going to be massive and I imagine the large tire sections will follow this week.
In other news, Payday Express, the last of Park City’s detachables with white paint received its new red and silver paint job last week along with Flat Iron next to the new gondola. Just about every lift at the combined resort has been painted this summer with the exception of a few fixed-grip lifts on the Park City side. Check out more pictures of the construction after the jump.
It used to be when you boarded the gondola to Silver Mountain in Kellogg, Idaho, a huge sign proclaimed, “Welcome to the World’s Longest Gondola.” At 16,350 feet, the Silver Mountain Gondola held that title from its opening in 1990 until May 2009. That’s when Doppelmayr completed the Ba Na Cable Car in the mountains of Vietnam. A hundred and fifty feet longer than Silver’s gondola and a thousand feet taller, it broke world records for both length and vertical rise.
Fast forward a couple years and Leitner has crushed the ropeway length record again with a gondola in Turkey that opened in 2014. Like the Silver Mountain Gondola, the Bursa-Uludag Gondola connects a city with a ski resort but this one is split into in three sections. It starts in Bursa (Turkey’s fourth largest city) at only 1,300 feet above sea level and tops out at the Uludag resort town and national park at 6,000 feet. The combined system is just under 29,000 feet long with a vertical rise of 4,600 feet. It has 139 Sigma Diamond cabins and 44 towers. The entire system takes only 22 minutes to ride at 6 m/s, replacing a 35-kilometer drive on a mountain road that took over an hour.
As if the Ba Na Cable Car and Bursa-Uludag Gondola aren’t cool enough, there’s also a 26,000 foot 3S gondola under construction in Vietnam that will relegate Silver Mountain’s gondola to the world’s fourth longest.
1. Single Chair, Mad River Glen, VT – 1948 American Steel & Wire Single Chair
The single chair at MRG still has its original towers and terminal structures but everything else was replaced by Doppelmayr CTEC in 2007. As part of that project, towers were removed, sandblasted and repainted before being flown back to new foundations with new line gear. Doppelmayr also replaced the bullwheels, chairs, grips, drive and haul rope. This begs the question of ‘when is an old lift a new lift?’
2. Gatlinburg Sky Lift, Gatlinburg, TN – 1954 Riblet double
Everett Kircher of Boyne fame bought this chairlift from Sugar Bowl, CA for $3,000 in 1954. Originally it was a single chair built in 1939. Modified sheave assemblies were machined at the Kircher’s car dealership in Michigan when the lift went to Tennessee. At some point it appears to have gotten newer-style Riblet towers. Boyne Resorts still operates this lift 800 miles from their nearest ski resort. (edit: JP notes in the comments below that this version was replaced by a Riblet double in 1991. Thanks JP!)
3. Chair 1, White Pass, WA – 1955 1962 Riblet double
This lift only operates on busy weekends and holidays but it’s an old one and a good one . A classic Pacific Northwest center-pole double with very few modifications from its original design and no safety bars! (edit: Brian notes in the comments that this lift was actually installed as Chair 2 in 1962. The original chair 1 operated 1955-1994.)
Lift Blog 